FuhQuake Homepage : http://www.fuhquake.net/ FuhQuake Author : A Nourai aka 'fuh' (#fuhquake on Quakenet irc) FuhQuake Forum : http://www.fuhquake.net/forum/ There are 3 ways of using the 'track' command. The first is 'track player_name' (use name completion with this obviously). The second is 'track userid' (pretty useless). The third is the best and most important. It is demonstrated below. --------------------- bind KP_1 "track #1" bind KP_2 "track #2" bind KP_3 "track #3" bind KP_3 "track #4" bind KP_5 "track #5" bind KP_6 "track #6" bind KP_7 "track #7" bind KP_8 "track #8" ---------------------- In a 4v4 mvd, the above 8 binds will make the keypad numbers 1,2,3,4 track the four players on one team and make the keypad numbers 5,6,7,8 track the four players on the other team. In a 2v2 keypad numbers 1,2 = first team and 3,4 = second team. You can bind more keys (all the way up to 'track #32') if you are watching a 16v16 etc. Oh and if you are watching an 8 way ffa, then the above binds assign one keypad number to each of the players. If its a 2v2v2 then keypad numbers 1,2 = first team, 3,4 = next team and 5,6 = last team. etc etc So basically #1 #2 #3 ... order the players by teams. I recommend making a config just for spectating and watching mvd's with cfg_save/cfg_load .